EAB Associates supply a wide range of waterproofing and building materials including lightweight foamed concrete, waterproofing membranes, fire protection coatings, joint sealants, anti-corrosion and insulation coatings.
  EABASSOC Waterproofing and Building Products: Homepage EABASSOC Waterproofing and Building Products: About Us EABASSOC Waterproofing and Building Products: Frequently Asked Questions EABASSOC Waterproofing and Building Products: Contact Us
 



EABASSOC Waterproofing and Building Products: Product Digest

EABASSOC Waterproofing and Building Products: Lightweight Foamed Concrete

EABASSOC Waterproofing and Building Products: Liquid Waterproofing Coatings

EABASSOC Waterproofing and Building Products: Instant Waterproofing Coatings

EABASSOC Waterproofing and Building Products: Fire Protection

EABASSOC Waterproofing and Building Products: Thermal Insulation Coatings

EABASSOC Waterproofing and Building Products: Anti-Corrosion Coatings

EABASSOC Waterproofing and Building Products: Joint Sealants

EABASSOC Waterproofing and Building Products: Sheet Membranes

EABASSOC Waterproofing and Building Products: Other Products

 

LIGHTWEIGHT FOAMED CONCRETE
EABASSOC FOAMING AGENT


EABASSOC Foaming Agent is a highly concentrated, highly efficient liquid which is used in the production of EABASSOC Lightweight Foamed Concrete.
High Efficiency / Low Dosage

Dosage Rate: 0.3 - 0.6 ltrs/m³

The vast majority of mix designs used for making the various grades of EABASSOC Foamed Concrete typically require 0.3-0.6 ltrs of EABASSOC Foaming Agent per 1m³ of foamed concrete produced.

EABASSOC Foaming Agent


Special Features:

  • Low cost / high concentration: EABASSOC Foaming Agent has a LOW USAGE rate and it is this which must be considered when choosing a foaming agent, not just its basic price per litre.
  • Excellent stability over a wide range of temperature and water quality. This stability means that the foam bubbles sustain themselves and support the mortar around them. The bubbles do not burst easily and hence the foamed concrete does not collapse when it is made or after it has been placed.
  • High efficiency means that a high level of air entrapment is possible, hence low density foamed concrete can be achieved without using excessive foaming agent.
  • Excellent strength and thermal insulation properties means the foamed concrete produced from EABASSOC Foaming Agent is ideal for a wide range of applications.


USES AND ADVANTAGES

When processed through a foam generator, a solution of EABASSOC Foaming Agent in water creates a stiff, white foam with a 20 to 25 times increase in volume and NO foam collapse. The foam can easily be incorporated into any mortar mix to make EABASSOC Foamed Concrete, even when using cold water.

EABASSOC Foaming Agent may be used with all types of Portland cement and incorporated into cement only, or sand-cement mortar slurries to produce foamed concrete of every type and for every application. Its cost as a proportion of the total cost of foamed concrete is tiny, typically only about 1-3%.

EABASSOC Foaming Agent is essentially harmless and easily washes off.

For more information see the Frequently Asked Questions section.

TOP