Liquid Waterproof Coatings: TPU

EABASSOC TPU is a high performance solvent based elastomeric coating which cures to a tough, flexible, rubber sheet, to protect floors, walls, roofs and underground structures from penetration by water and water vapour.

High tensile strength and flexibility	Strong and resistant to abrasion
High resistance to oils	more than 500% elongation
Single component product	Resistant to UV
Usable on most surfaces	Long life
92% solid content	Conforms to ASTM C836

EABASSOC TPU forms a strong, hard, yet flexible membrane. Its resistance to abrasion makes it suitable for lining sewage channels, whilst its high resistance to oils makes it ideal for use on car park decks in a sandwich construction.

It is also resistant to standing water and even resists water before fully cured. EABASSOC TPU can be applied onto most surfaces, including concrete, metal and wood, and its main application areas are roofing (due to its resistance to UV radiation) and the waterproofing of floors and underground structures.

EABASSOC TPU is elastomeric with a high elongation and recovery after stretching, and so is able to withstand significant structural movement.

It is a one component, easy to apply product. Application is mainly by bush, squeegee or airless spray equipment. Its high solids content means that little of the wet thickness is lost to evaporation.

EABASSOC TPU is solvent based and, therefore, not damaged by freezing temperatures.

Additionally, although it is solvent based, the solvent used has a very high flash point which means that it is not classed as flammable. For a water based elastomeric liquid waterproof coating see EABASSOC RBE and for more information about the differences between water based and solvent based liquid waterproof coatings, see the Frequently Asked Questions page.