EAB Associates supply a wide range of waterproofing and building materials including lightweight foamed concrete, waterproofing membranes, fire protection coatings, joint sealants, anti-corrosion and insulation coatings.

  EABASSOC Waterproofing and Building Products: Homepage EABASSOC Waterproofing and Building Products: About Us EABASSOC Waterproofing and Building Products: Frequently Asked Questions EABASSOC Waterproofing and Building Products: Contact Us
 



EABASSOC Waterproofing and Building Products: Product Digest

EABASSOC Waterproofing and Building Products: Lightweight Foamed Concrete

EABASSOC Waterproofing and Building Products: Liquid Waterproofing Coatings

EABASSOC Waterproofing and Building Products: Instant Waterproofing Coatings

EABASSOC Waterproofing and Building Products: Fire Protection

EABASSOC Waterproofing and Building Products: Thermal Insulation Coatings

EABASSOC Waterproofing and Building Products: Anti-Corrosion Coatings

EABASSOC Waterproofing and Building Products: Joint Sealants

EABASSOC Waterproofing and Building Products: Sheet Membranes

EABASSOC Waterproofing and Building Products: Other Products

 

LIQUID WATERPROOF COATINGS
RBC ALUMINIUM

 

EABASSOC RBC Aluminium is a one coat, reinforced, protective compound for the maintenance of sloping, corrugated metal and asbestos-cement sheet roofs. It is also suitable for over-coating bituminous membranes and mastic asphalt on flat roofs which should have sufficient slope to prevent standing water. It seals and waterproofs, reduces heat gain and protects against corrosion.

Application of RBC Aluminium

  • Minimal surface preparation
  • Flexible, durable and resistant to water
  • One-pack, ready to use
  • Not an emulsion - will not wash off
  • One coat, cheap and easy application
  • Resistant to UV and high temperature
  • Will not flow off high spots and slopes
  • Long life, usually in excess of 10 years
  • Excellent adhesion, even to old surfaces
  • Exceeds ASTM D2824
  •  

    Before and After:

    The KIRIN Brewery roof at Kyoto, Japan before RBC Aluminium was applied.

    RBC Aluminium applied to the KIRIN Brewery at Kyoto, Japan.


    USES AND ADVANTAGES


    EABASSOC RBC Aluminium is a reinforced bitumen waterproofing compound. It produces a membrane with high adhesive strength, but low cohesion. Therefore, unlike elastomeric coatings, it will not delaminate as a single sheet if there is a substrate fault or application error. It is thixotropic, and will smoothly and quickly produce a uniform, durable protective layer. It requires only simple surface preparation, although cracks, holes or open joints should be covered with EABASSOC Flashing Tape.

    EABASSOC RBC Aluminium is totally resistant to water and so is ideal for use on steel and on fibre cement boards. It seals against water and air, thus preventing corrosion of the former and inhibiting the natural weathering of the latter, which makes such boards thin and porous if they are not protected. It will also seal old, porous asbestos-cement sheets, preventing water penetration. It is not an emulsion, contains no emulsifying agents, and so will not wash off.

    EABASSOC RBC Aluminium provides a genuine protective coating and is not merely a decorative finish. Other EABASSOC RBC Compounds are available in a range of colours: Red, Dark Green, Dark Blue, Light Green and Light Blue. All are genuine protective coatings.

    TOP

     

    | Home Page | Product Digest |
    | About Us | Frequently Asked Questions |
    | Information Request |