EAB Associates supply a wide range of waterproofing and building materials including lightweight foamed concrete, waterproofing membranes, fire protection coatings, joint sealants, anti-corrosion and insulation coatings.
  EABASSOC Waterproofing and Building Products: Homepage EABASSOC Waterproofing and Building Products: About Us EABASSOC Waterproofing and Building Products: Frequently Asked Questions EABASSOC Waterproofing and Building Products: Contact Us
 



EABASSOC Waterproofing and Building Products: Product Digest

EABASSOC Waterproofing and Building Products: Lightweight Foamed Concrete

EABASSOC Waterproofing and Building Products: Liquid Waterproofing Coatings

EABASSOC Waterproofing and Building Products: Instant Waterproofing Coatings

EABASSOC Waterproofing and Building Products: Fire Protection

EABASSOC Waterproofing and Building Products: Thermal Insulation Coatings

EABASSOC Waterproofing and Building Products: Anti-Corrosion Coatings

EABASSOC Waterproofing and Building Products: Joint Sealants

EABASSOC Waterproofing and Building Products: Sheet Membranes

EABASSOC Waterproofing and Building Products: Other Products

 

INSTANT WATERPROOF COATING
SPRAYTEC



EABASSOC Spraytec is a water based, spray applied system, which cures instantly to form a seamless, highly elastic waterproofing membrane. It consists of a special rubber bitumen emulsion and a liquid precipitant, which when simultaneously sprayed, produce an instantaneous solid membrane on the substrate.

 
  • Very strong, very elastic
  • Watertight the instant it is sprayed
  • Resistant to puncturing
  • Self healing
  • UV resistant
  • Highly versatile
  • Resistant to high and low temperatures
  • Requires minimal surface preparation
  • Environmentally friendly
  • Good anti-corrosion properties
  • Excellent slump resistance
  • Ideal for use where fast curing is essential
  • Use where fast curing is essential
  • Excellent adhesion
  • Very cost effective
  • Approved for use with potable water
  • Can be applied in wet conditions
  • Exceeds ASTM D412

    • Application of EABASSOC Spraytec

     

    USES AND ADVANTAGES


    EABASSOC Spraytec cures instantly to form a versatile elastomeric membrane. It has a variety of applications including roofing, tunnels, underground structures, water channels and reservoirs. It is principally used in areas where fast curing is essential and is considered one of the most cost effective products of its type

    .Spray application of EABASSOC Spraytec

    Application is fast and easy. A single coat is normally sufficient and up to 1000 square metres can be applied in a single day. It is unaffected by water so can be applied on uncured concrete and damp surfaces without re-emulsifying. It can be sprayed directly onto most surfaces and has excellent adhesion. The high pH value also gives it good corrosion properties.

    The membrane formed is seamless and soft, so, although it resists puncturing it can be cut by a knife. However, unlike other membranes it is self healing and so, due to its elastic recovery and high level of adhesion, it will join back together.

    EABASSOC Spraytec is water based, non-flammable, does not give off toxic fumes, and is environmentally friendly.

    TOP

     

    | Home Page | Product Digest |
    | About Us | Frequently Asked Questions |
    | Information Request |