EAB ASSOCIATES PRODUCT DIGEST
|
Foamed Concrete |
Fire Protection |
Instant
Waterproof Coating |
|
Joint
Sealants |
Sheet
Membranes
|
Liquid
Waterproof Coatings |
| Thermal
Insulation Coatings |
Anti-Corrosion
Coatings |
Below are short summaries about each of our building and construction products as well as links to detailed information about each product. Our products can be used for many applications in construction such as roof waterproofing, underground damp-proofing, waterproofing of internal floors and walls, joint sealing and caulking, protection of metal surfaces, and thermal insulation of surfaces. We also supply admixtures for concrete and foaming agent for making lightweight foamed concrete.
Lightweight Foamed Concrete / Cellular Concrete |
|
EABASSOC Lightweight Cellular Foamed Concrete: a lightweight, free flowing and pumpable material which is ideal for a wide range of
applications. It is made by adding a special foam to a cement mortar
slurry. This foam is made from:
EABASSOC Concrete Foaming Agent: a
highly concentrated, highly efficient, low dosage liquid which is
quick acting and easy to incorporate into a concrete mix. It is
fed with water into an EABASSOC
Foam Generator to produce a very stable,
stiff foam which resists collapse.
TOP
Liquid Waterproof Coatings |
|
EABASSOC RBC Aluminium - Protective Coating:
a one coat reinforced, protective compound for the maintenance of
sloping, corrugated metal and asbestos-cement sheet roofs. It is
also suitable for over-coating bituminous membranes and mastic asphalt on flat roofs,
and for general metal protection. Other colours available.
EABASSOC TPU Waterproofing Membrane: a
high performance, one component, solvent based elastomeric coating
which cures to form a tough, flexible, UV resistant rubber sheet.
Protects floors, walls, roofs and underground structures from penetration
by water and water vapour.
EABASSOC RBE Waterproof Coating: a versatile, inexpensive, cold-applied,
water-based elastomeric coating, used for damp-proofing walls, floors
and foundations, and for use as a roof waterproofing membrane in
certain circumstances.
What is the difference between water based and solvent based Liquid Waterproof Coatings?
TOP
Instant Waterproof Coating |
|
EABASSOC
Spraytec - Instant Waterproof Coating :
a water based, spray applied system, which cures instantly
to form a seamless, highly elastic waterproofing membrane. It consists
of a special rubber bitumen emulsion and a liquid precipitant, which
when simultaneously sprayed, produce an instantaneous solid membrane
on the substrate.
EABASSOC Spraytec - Instant Waterproof Coating has a variety of applications in construction and civil engineering. These include waterproofing roofing, tunnels, underground structures, foundations, slurry walls, water channels and reservoirs. It is principally used for coating large surface areas or where fast curing waterproof membrane is essential.
TOP
EABASSOC FR - Fire Resistant Coating: a water based polymeric
vapour barrier coating, provides a fire resistant (Class "O")
weatherproof coating, suitable for both internal and external use. It is used
primarily to protect modern insulation materials and for asbestos
encapsulation.
TOP
Thermal Insulation Coatings |
|
EABASSOC Elastotherm AC - Thermal Insulation Coating: a ready-to-use, water
based coating with excellent thermal insulation, anti-condensation,
anti-corrosion and anti-carbonation properties. It reflects and emits heat, reduces
the need for insulation and keeps buildings cool on hot, sunny days.
TOP
EABASSOC BSP - Anti-Corrosion Coating: a high quality, polymeric, water
based chemical converter and primer for rusted surfaces, which can
cope with conditions where ordinary anti-corrosion primers will
not function. It chemically converts damp and rusty surfaces, making
them suitable for the application of high performance coatings without
the need for special, expensive surface preparation.
EABASSOC Waxproof - Anti-Corrosion Coating is
a semi-soft anti-corrosion coating for ferrous and non-ferrous metals.
Waxproof is used to stifle inaccesible corrosion and is ideal for
the protection of enclosed steel work, such as box sections from
rust. It is particularly suited for use on unprepared surfaces in
circumstances where surface preparation is not practical, e.g. the
box sections of motor vehicles, around bundles of cables, in ships'
hulls and any other inaccessible places. Waxproof can also be used
as a lubricant.
EABASSOC RBC Aluminium - Protective Coating
is also suitable for use as an Anti-Corrosion Coating. See Liquid Waterproof Coatings above.
TOP
EABASSOC Lo-Mod - Elastomeric Joint Sealant: a one component, multipurpose
elastomeric joint sealant, which is easy to apply and does not require
a primer in most cases. It cures to give a very flexible, long lasting
waterproof seal, capable of withstanding +/-50% movement and suitable
for sealing expansion joints.
EABASSOC Building Sealant Caulking Compound is
a basic, inexpensive, oil based, external quality caulking compound
for joint and crack sealing. It bonds well with most building materials
and can be used both externally and internally.
TOP
EABASSOC SBS and APP Torching Membranes: high
performance torch-on waterproofing membranes based on SBS rubber
and APP plastomer modified bitumen respectively, reinforced with nonwoven polyester.
EABASSOC 100 PE - Self-Adhesive Sheet Waterproofer:
consisting of a cross-laminated, high density, polyethylene sheet
coated with a bitumen polymer adhesive compound. A robust membrane
which is clean and easy to apply with excellent adhesion to primed
surfaces and to itself at overlaps.
Should I use a Torching Membrane or a Self Adhesive Membrane for waterproofing a floor or roof?
TOP
EABASSOC Flashing Tape - Self-Adhesive Tape
comprising of an aluminium foil backed by a flexible modified bitumen
adhesive compound. It is used for the repairing of gutters, pipes,
joints, glazing systems etc.
and for covering cracks and joints prior to applying EABASSOC RBC Aluminium - Protective Coating and other liquid coatings.
EABASSOC Concentrated Concrete Curing Compound is a wax based emulsion for use on fresh concrete, which prevents excessive water loss during the curing period.
EAB
Associates also offer a comprehensive range of ancillary products
for the sealing and waterproofing of buildings as well as additional
concrete related products.
TOP
For more detailed information
about the EABASSOC products, please click on the relevant
links. Alternatively, submit a request form and we will be very
happy to supply you with the relevant data sheets.
Please
note that all EABASSOC product information is given in good
faith and every effort is made to ensure that it is accurate and
up to date. It is, however, the responsibility of the customer to
ensure that products are suitable for the required purpose and if
in doubt, sample orders should be taken for trial purposes.
TOP
EAB ASSOCIATES Building and Construction Products
|
|
